Description
Viking 21kW Single or Three Phase Resistive Load Bank
Single or three phase resistive power proving load bank is the perfect workshop solution for testing small generators or UPS units.
- Single or three phase operation
- Low watts density stainless steel resistors IP65
- Powerlock fittings to enable quick connection between 1PH & 3PH applications
- Selector switch for operation between 1PH & 3PH loads
- Suitable for workshop load testing or permanent installation
- Load switching (0-21KW) in 1KW steps
- Water resistant load step switches
- Low noise external rotor cooling fan
- Over temperature & fan fail protection
SPECIFICATIONS
DIMENSIONS: Standard : H:820 mm W:900 mm D:600 mm (includes wheel kit)
UNIT WEIGHT: Standard: 105 kG
LOAD RATING: 21KW @ 415 volt AC /- 10%, 50Hz / 21KW @ 240 volt AC /- 10%, 50Hz
LOAD STEPS: Three load circuits with rotary switching in 1KW increments to maximum of 7KW per circuit
LOAD CABLE CONNECTIONS: Standard Australian single phase 3 pin plug. 1 x 10amp for 2.4KW circuit, 2 x 15amp for the 2 x 3KW circuits
FAN MOTOR: 700W 240 Volt 50Hz ,4 pole external rotor with low noise fan impeller
FINISH: Grey/black UV stabilised Powder Coat with stainless steel fasteners
ENCLOSURE: IP44
WHEEL KIT: Four (4) heavy duty casters, 2 with brakes
SOUND LEVEL: 72 dba @ 1 metre
