Description
Viking 500 kW Manual Resistive Load Bank
- Integrated PLC Controller with Colour Touch Screen
- IP65 Stainless Steel Load Resistors
- Circuit Breakers on Each Load Group
- Contactor Switching In 5kw Steps
- Low-Watts Density Load Resistors
- Over Temperature & Fan Fail Protection
- Ip55 Fan Motor & Aluminium Cooling Fan
- Insulated Resistor Compartment
- 2mm Zinc Coated Steel Body
- Stainless Steel Grille and Fasteners
SPECIFICATIONS
- DIMENSIONS: Standard : H:2070mm W:1315mm D:1408mm Forklift Base: H:2070mm W:1315mm D:1408mm
- UNIT WEIGHT: Standard : 768 KG With Forklift base: 860 KG
- LOAD RATING: 500KW @ 400 volt AC /- 10%, 50Hz, 3 wire connection (Other voltages and Hz ratings available)
- LOAD STEPS: Switching in 5KW load increments.
- DIGITAL METERING: Backlit LCD for Volts, Amps KW, KVA, KWH, PF with RS-485 Mod-Bus communication
- RESISTOR WIRING: 200 degree C rated silicone insulated
- LOAD CABLE CONNECTIONS: 40 x 10mm Copper busbar with 2 x M12 bolted connections per phase
- FAN MOTOR: 7.5 KW, 400 VOLT /- 10%, 50Hz ,4 pole, IP54. DOL start with thermal overload
- FINISH: Grey/black UV stabilised Powder Coat with stainless steel discharge grille and fasteners
- ENCLOSURE: IP54 (control panel door closed)
OPTIONS:
- FORK LIFT BASE: Heavy duty hot dip galvanised forklift base (pictured above)
- CABLE HANGERS: Folding hanger brackets (2) for flexible cable storage (picured above)
- DIGITAL METERING: Backlit LCD for Volts, Amps KW, KVA, KWH, PF with RS-485 Mod-Bus communication
- AUXILLARY POWER: External control/fan power inlet with panel mounted changeover switch (wiring only)
- FAN REVERSE: Fan motor reversing switch to change air flow direction when supply phase rotation is incorrec
- POWERLOCK: Powerlock twist type shielded connectors for incoming power supply (600 amp rated)
Ask about our Service and Maintenance plans to ensure you are getting the best life out of your generator, we pride ourselves on our expertise and experience.