Viking 200kW Manual Resistive Load Bank

Viking Power Systems range of manual resistive load banks can confidently withstand everyday use in a demanding industrial or rental environment.

1 in stock

SKU: VPS20M-LBR-PLC/200 Categories: , , ,


Viking 200kW Manual Resistive Load Bank

  • Integrated PLC Controller with Colour Touch Screen
  • IP65 Stainless Steel Load Resistors
  • Circuit Breakers on Each Load Group
  • Contactor Switching In 5kw Steps
  • Low-Watts Density Load Resistors
  • Over Temperature & Fan Fail Protection
  • IP55 Fan Motor & Aluminium Cooling Fan
  • Insulated Resistor Compartment
  • 2mm Zinc Coated Steel Body
  • Stainless Steel Grille and Fasteners


    • Standard: H:1375mm W:1055mm D:1055mm                                                                                                  
    • With wheel kit: H:1580mm W:1145mm D:1055mm
    • With Installation base: H:1500mm W:1055mm D:1055mm
  • UNIT WEIGHT: Standard : 382 KG      Install base: 405 KG      With wheel Kit: 428 KG
  • LOAD RATING: 200KW @ 400 volt AC /- 10%, 50Hz, 3 wire connection (Other voltages and Hz ratings available)
  • LOAD STEPS: 5KW load increments.
  • DIGITAL METERING: Backlit LCD for Volts, Amps KW, KVA, KWH, PF with RS-485 Mod-Bus communication
  • RESISTOR WIRING: 200 degree C rated silicone insulated
  • LOAD CABLE CONNECTIONS: 40 x 10mm copper busbar with 2 x M12 bolted connections per phase
  • FAN MOTOR: 4.0KW, 400 VOLT /- 10%, 50Hz ,4 pole TEFC, IP54. DOL start with thermal overload
  • FINISH: Grey/black UV stabilised Powder Coat with stainless


  • WHEEL KIT: Heavy duty 125mm ball bearing swivel type wheels (4) with brakes (2) and mounting hardware kit
  • INSTALLATION BASE: Steel section mounting rails for permanent installation (black powder coat finish)
  • DIGITAL METERING: Backlit LCD for Volts, Amps KW, KVA, KWH, PF with RS-485 Mod-Bus communication
  • AUXILLARY POWER: External control/fan power inlet with panel mounted changeover switch (wiring only)
  • FAN REVERSE : Fan motor reversing switch to change air flow direction when supply phase rotation is incorrect
  • POWERLOCK: Powerlock twist type shielded connectors for incoming power supply (400 amp rated)

Ask about our Service and Maintenance plans to ensure you are getting the best life out of your generator, we pride ourselves on our expertise and experience.

Additional information



Phase Type



Agriculture, Emergency Standby, Industrial, Mining & Construction, Rental & Hire, Residential Backup, Solar Backup

Data Sheets


Product Enquiry

Product Enquiry