Load Banks

Engineered for Reliability

Our range of VIKING load banks have been engineered tough, to withstand demanding testing environments and provide reliable performance.

Our Extensive Range of Load Banks

We offer an extensive range of automatic load shedding and manually switchable Load Banks to suit all applications. Designed to confidently withstand everyday use in harsh and demanding environments.

Power Proving Resistive Load Banks that provide:

  • Capability Testing
  • Reliability Testing
  • Capacity Testing
  • Maintenance Testing

For all applications including:

  • Workshops
  • On-site load testing
  • Permanently installed auto base loading units to prevent “wet stacking” of diesel generating sets when running on light loads.

Automatic Load Shedding

The Viking ALS “Load-Logic” range of load banks are designed to provide automatic single or multiple step loading of diesel or gas fuelled generating sets. The ALS units maintain sufficient base load on the generator to reduce or eliminate light load running.

Manually Switchable

The Viking portable load bank range provides an extensive range of load ratings and features to suit most generating set or Uninterruptible Power Supply (UPS) testing situations, either in the workshop or on-site. A number of options are available for portable units:

Hot dip galvanized fork lift base with heavy duty roll frame to suit rental applications.

  • Powerlock power inlet connections.
  • Auxiliary power inlet for control and cooling power supply
  • Fan reversing switch to rectify incorrect phase rotation.
  • Folding Cable Hangers

Resistive Auto Load Shedding Load Banks

Our range of load banks are designed for both portable and permanently installed applications.

VIKING load banks will withstand everyday use in demanding environments - commercial, data centre, industrial & mining. Our range includes dedicated single phase, multi-phase and three phase load banks from 8.4kW – 2,500kW.

  • Auto connect & disconnect of load steps to maintain preset generator loading
  • Continually monitors external generator load to prevent under or over loading
  • Manual load testing facility
  • Multi function plc colour touchscreen
  • IP65 stainless steel load resistors
  • Circuit breaker load step protection
  • Over temperature & fan fail protection
  • Stainless steel (304) fasteners

Auto Load Shedding (ALS) Load Banks

Load bank testing is vital to replicate and verify the operation of critical backup power systems such as diesel generators and uninterruptible power supplies (UPS).

Generator Power provide load banks that excel in a range of load test applications and environments. Rugged and built to last, we offer purely resistive, portable units up to high capacity resistive & reactive containerised solutions. Combined with best-in-class load bank control, Generator Power provides comprehensive testing, monitoring and reporting capabilities with unrivalled ease, efficiency and value for money.

The Viking ALS “Load-Logic” range of load banks

The Viking ALS “Load-Logic” range of load banks are designed to provide automatic single or multiple step loading of diesel or gas fuelled generating sets. The ALS units maintain sufficient base load on the generator to reduce or eliminate light load running. This is the primary cause of accelerated engine wear and “wet stacking” for prime power and standby generators and is common where the set is supplying a varying load.

The ALS Load bank’s customer programmable settings allow constant load sensing of the external load on the generating set and the automatic application or removal of load bank steps to maintain a pre-set load on the generator. Manual operation of load steps is also available for routing testing. Standard or custom kilowatt ratings with a number of control options are available and can be tailored to customer requirements.

Portable Workshop Resistive Load Bank Range

The VIKING workshop load bank range is designed to be both portable and user friendly.

Quiet, light weight and easy to use. All models include low noise cooling fans, switching in 1kW manual steps & over temperature protection.

Model

kW Rating

Phases

Controller

IP Rating

Power Meter

Electrical Connection

Single Phase

VPS5S-LBR/8.4

8.4kW

1PH

Manual Switches 1kW Steps

23

Option

15A Plugs

Three Phase

VPS5S-LBR/8.4-3

8.4kW

3PH

Manual Switches 1kW Steps

23

Option

32A Plug

Multi Phase

VPS5L-LBR/21MS

21kW

1PH / 3PH

Manual Switches 1kW Steps

44

Included

Powerlock

VPS5L-LBR/50MS

50kW

1PH / 3PH

Manual Switches 1kW Steps

44

Included

Powerlock

Manually Switchable Resistive Load Bank Range

The VIKING manually switchable load bank range is designed with quality in mind

A comprehensive range of load ratings from 50kW to 2500kW with features to suit most generating set or UPS testing requirements. All models are manufactured using IP65 stainless steel, low watt density resistors for a reliable service life.

Units include the manual “Load-Logic” PLC controller with 7” colour touch screen interface. This provides manual control of load steps or the selection of an automatic
generating set load test sequence while providing comprehensive data feedback to the operator. Insulated resistor compartments ensure external temperatures are always maintained close to ambient for operator safety.

Model

kW Rating

Phases

Controller

IP Rating

Power Meter

Electrical Connection

VPS10S-LBR-PLC/50M

50kW

3PH

PLC with 7” HMI
1kW Steps

54

Option

Busbar

VPS10S-LBR-PLC/100M

100kW

3PH

PLC with 7” HMI
5kW Steps

54

Option

Busbar

VPS20M-LBR-PLC/200M

200kW

3PH

PLC with 7” HMI
5kW Steps

54

Option

Busbar

VPS60S-LBR-PLC/300M

300kW

3PH

PLC with 7” HMI
5kW Steps

54

Option

Busbar

VPS60M-LBR-PLC/400M

400kW

3PH

PLC with 7” HMI
5kW Steps

54

Option

Busbar

VPS60M-LBR-PLC/500M

500kW

3PH

PLC with 7” HMI
5kW Steps

54

Option

Busbar

VPS60L-LBR-PLC/600M

600kW

3PH

PLC with 7” HMI
5kW Steps

54

Option

Busbar

VPS100X-LBR-PLC/800M

800kW

3PH

PLC with 7” HMI
5kW Steps

54

Option

Busbar

VPS100X-LBR-PLC/1000M

1000kW

3PH

PLC with 7” HMI
5kW Steps

54

Option

Busbar

VPS100X-LBR-PLC/1500M

1500kW

3PH

PLC with 7” HMI
5kW Steps

54

Option

Busbar

VPS100X-LBR-PLC/2000M

2000kW

3PH

PLC with 7” HMI
5kW Steps

54

Option

Busbar

VPS100X-LBR-PLC/2500M

2500kW

3PH

PLC with 7” HMI
5kW Steps

54

Option

Busbar

Auto Load Shedding Load Bank Range

The Viking Automatic Load Shedding range of load banks are designed to provide automatic single or multiple step loading of diesel or gas fuelled generating sets.

 The ALS units maintain sufficient base load on the generator to reduce or eliminate light load running. This is the primary cause of accelerated engine wear and “wet stacking” for prime power and standby generators and is common where the set is supplying a varying load

The ALS Load bank’s customer programmable settings allow constant load sensing of the external load on the generating set and the automatic application or removal of load bank steps to maintain a pre-set load on the generator. Manual operation of load steps is also available for routing testing. Standard or custom kilowatt ratings with a number of control options are available and can be tailored to customer requirements.

Model

kW Rating

Phases

Controller

IP Rating

Power Meter

Electrical Connection

VPS10S-LBR-PLC/20A

20kW

3PH

PLC with 7” HMI

54

Option

Busbar

VPS10S-LBR-PLC/30A

30kW

3PH

PLC with 7” HMI

54

Option

Busbar

VPS10S-LBR-PLC/40A

40kW

3PH

PLC with 7” HMI

54

Option

Busbar

VPS10S-LBR-PLC/50A

50kW

3PH

PLC with 7” HMI

54

Option

Busbar

VPS10S-LBR-PLC/100A

100kW

3PH

PLC with 7” HMI

54

Option

Busbar

VPS20M-LBR-PLC/150A

150kW

3PH

PLC with 7” HMI

54

Option

Busbar

VPS20M-LBR-PLC/200A

200kW

3PH

PLC with 7” HMI

54

Option

Busbar

VPS60S-LBR-PLC/250A

250kW

3PH

PLC with 7” HMI

54

Option

Busbar

VPS60S-LBR-PLC/300A

300kW

3PH

PLC with 7” HMI

54

Option

Busbar

VPS60M-LBR-PLC/400A

400kW

3PH

PLC with 7” HMI

54

Option

Busbar

VPS60L-LBR-PLC/600A

600kW

3PH

PLC with 7” HMI

54

Option

Busbar

VPS100X-LBR-PLC/800A

800kW

3PH

PLC with 7” HMI

54

Option

Busbar

VPS100X-LBR-PLC/1000A

1000kW

3PH

PLC with 7” HMI

54

Option

Busbar

Our most popular manual load banks

Viking 50KW

Manual Resistive Load Bank

Viking 100kW

Manual Resistive Load Bank

Viking 600kW

Manual Resistive Load Bank

Our most popular automatic load banks

Viking 100kW

Auto Load Shedding Load Bank

Viking 200kW

Auto Load Shedding Load Bank

Viking 600kW

Auto Load Shedding Load Bank

Custom Resistive Load Banks for Data Centres

Custom Data Centre Solutions

Our standard data centre products provide a resistive load testing solution for most applications however we realise that some projects require a customised design approach...

Perhaps horizontal air discharge, additional ducting, custom load step sizes or units to meet specific size and weight requirements. Our technical staff are always willing to look at the feasability of custom equipment to suit specific locations or uses.

Free Quote & Consultation

One of our generator experts will be in touch today

This field is for validation purposes and should be left unchanged.

Not sure what to choose? Contact us.